# Making your own Namespace configuration

As you now know, the WLAN Pi now supports automated management of namespace configuration.

To setup your WLAN Pi with the Namespaces functionality is a 4 step procedure

1. Install & configure the applications you want to run
2. Setup a link to those applications for use by the Namespace functions
3. Create one or more Namespace configuration(s)
4. Activate the configuration of your choice

Steps 1 & 2 are **pre-requisites** which the user must carry out directly on their WLAN Pi. This would usually be done with an SSH session.

Steps 3 & 4 are the **namespace configuration procedure** and can be managed from within the **WLAN Pi application**


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://userguide.wlanpi.com/wlan-pi-os/network-info/making-your-own-namespace-configuration.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.